Frigidaire 316495063 warranty C. Determining Wall Plate Location Under Your Cabinet, cabinet

Installation Instructions

C. DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET

Plate position—beneath flat bottom	Plate position—beneath framed recessed
cabinet	cabinet bottom

Mounting Plate Tabs	Mounting Plate Tabs
Touching the Cabinet Bottom	Touching the Back Frame

At least 30″ (76.2 cm), up to 36″ (91.4 cm)

30″ (76.2 cm)

to Cooktop

Plate position—beneath recessed bottom cabinet with front overhang

Mounting Plate with

Tabs Below Cabinet

Bottom the Same

Distance as the Front

Overhang Depth

30″ (76.2 cm)

to Cooktop

Your cabinets may have decorative trim that interferes with the microwave installation. Remove the decorative trim to install the microwave properly and to make it level.

THE MICROWAVE MUST BE LEVEL.

Use a level to make sure the cabinet bottom is level.

If the cabinets have a front overhang only, with no back or side frame, install the mounting plate down the same distance as the front overhang depth. This will keep the microwave level.

1Measure the inside depth of the front overhang.

2Draw a horizontal line on the back wall an equal distance below the cabinet bottom as the inside depth of the front overhang.

3For this type of installation with front overhang only, align the mounting tabs with this horizontal line, not touching the cabinet bottom as described in Step D.

7