Setting Oven Controls
Note: The time of day must first be set in order to operate the oven.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
Clock
1.Press Horloge once (do not hold pad down).
2.Within 5 seconds, press and hold the or until the correct time of day appears in the display. Note: The clock cannot be changed during any timed bake or
To Set the Minute Timer:
Timer
On/Off
1. Press Minuterie .
2. Press the to increase the time in one minute increments. Press and hold the to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If the pad is pressed first, the timer will advance to 11 hours and 59 minutes.
3.The display shows the timer countdown in minutes until 1 minute remains. Then the display will countdown in seconds.
4.When the set time has run out, the timer will beep 3 times. It will then continue to beep 3 times every 60 seconds until
While the timer is active and shows in the display, press and hold the or to increase or decrease the time.
Timer
On/Off
Minuterie .
Clock
Note: To turn the time of day display OFF or ON in the display press Horloge and hold for 15 seconds (the control will beep once) and then release. This feature does not remove the set time of day from the memory of the control. When the
Clock
display is turned OFF the time of day will reappear for a few seconds any time the Horloge pad is touched.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory.The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
Broil
1.Press Griller . "—
2.Press and hold the until "HI" appears in the display.
Broil
3.Press and hold Griller until °F or °C appears in the display.
4.Press the or to change °F to °C or °C to °F.
5.Press any control pad to return to normal operating mode.
2