Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function:

1. Press Timer Set up on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press MODE/ ENTER to display the Presentation Timer page.

2.Highlight Timer Period and decide the timer

period by pressing / . The length of time can be set from 1 to 5 minutes in 1- minute increments and 5 to 240 minutes in 5-minute increments.

3.Press to highlight Timer Display and choose if you want the timer to show up on the screen by pressing / .

Selection

Description

Always

Displays the timer on screen throughout the presentation time.

 

 

1 min/2 min/3 min

Displays the timer on screen in the last 1/2/3 minute(s).

 

 

Never

Hides the timer throughout the presentation time.

 

 

4.Press to highlight Timer Position and set the timer position by pressing / .

Top-Left Bottom-Left Top-Right Bottom-Right

5.Press to highlight Timer Counting Direction and select your desired counting direction by pressing / .

Selection

Description

Count Up

Increases from 0 to the preset time.

 

 

Count Down

Decrease from the preset time to 0.

 

 

6.Press to highlight Sound Reminder and decide if you want to activate sound

reminder by pressing / . If you select On, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep sound will be produced when the timer is up.

7.To activate the presentation timer, press and press / to select On and press

MODE/ENTER.

8.A confirmation message displays. Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is On” displaying on the screen. The timer starts counting at the time the timer is on.

To cancel the timer, perform the following steps.

Using the remote control.

Press Timer On and press / to highlight Off and press MODE/ENTER.

Using the OSD menu.

Operation 39

Page 39
Image 39
BenQ MX661 Setting the presentation timer, To cancel the timer, perform the following steps, Selection Description