Shutting down the projector
1. Press II POWER and a confirmation
message displays prompting you.
If you don't respond in a few seconds, the message will disappear.
2. Press II POWER a second time. The POWER indicator light flashes orange, the projection lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector.
• To protect the lamp, the projector will not respond to any commands during the cooling process.
•To shorten the cooling time, you can also activate the Quick Cooling function. See "Quick Cooling" on page 78 for details.
3.Once the cooling process finishes, the POWER indicator light is a steady orange and fans stop.
4.Disconnect the power cord from the power putlet if the projector will not be used in an extended period of time.
5.When Instant Restart is On, users can restart projector immediately within 90 secs after turning off projector. (Projector will maintain 30% of power during the 90 secs)
When Instant Restart is Off, users need to wait lamp to cool down to restart the projector. When instant restart is on, quick cooling item will be grey out
•If the projector is not properly shut down, to protect the lamp, when you attempt to
•Actual lamp life may vary due to different environmental conditions and usage.
Operation 69
