BenQ MX661 user manual Wireless connection

Wireless connection

BenQ wireless dongle

1.Connect the BenQ wireless dongle (optional) to the TYPE-A input jack of the projector.

2.Highlight Wireless LAN in SYSTEM SETUP: Advanced > Network Settings menu and press MODE/ENTER.

3.Make sure the Status is Connect.

4.Make sure the SSID information is displayed.

5.For AP mode, you need to use your computer’s wireless connection utility to search the projector’s SSID and connect to it. The password of connection the Wi-Fi for the first time is “87654321”. Then you can search the projector with Q Presenter. To use Client mode, you should connect both your computer and projector to the same AP router and make connections with the IP address. See "Displaying image through Q Presenter" on page 57 for details.

If WEP Key is set in the projector, the user must enter the password of WEP Key to connect the network.

The following diagram describes how to access the Internet in AP and Client modes.

(AP Mode)	(Client Mode)
	Internet
	Internet

If you need more information about AP and Client modes, please refer to user documentations for Wireless Routers which are usually available on 3C stores.

Operation 47