Connecting an S-Video/composite source device
Examine your Video source device to determine if it has an unused
•If it has both jacks, use the
•If it has either of the output jack, you can also continue with this procedure.
•If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to an S-Video/Video source device:
1.Take an
2.Connect the other end of the
3.If you wish to make use of the projector speaker(s) in your presentations, take a suitable audio cable and connect one end of the cable to the audio output jack of the device, and the other end to the AUDIO IN jack of the projector.
•If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.
24 Connection
