AVOID SERVICE CHECKLIST
Before you call for service - read this
You may save the cost and inconvenience of an unnecessary service call by first reviewing this easy to use Avoid- Service Check List of the most frequently encountered situations that are not the result of defective workmanship of materials.
You will be charged for a service call while the appliance is in warranty if the problem is not caused by defective product workmanship or materials.
Your new appliance is a carefully engineered product. Many times, what appears to be a reason to call for service requires nothing more than a simple adjustment you can easily make in your own home or is normal operating characteristic of appliance under certain conditions.
This list is applicable to a variety of models; some of the items will not necessarily apply to your appliance.
PROBLEMPOSSIBLE CAUSE / SOLUTION
INSTALLATION
Range is not level. | Poor installation. Place oven rack in center of oven. Adjust leveling legs |
| of range until the oven rack is level. |
|
|
| Be sure floor is level and is strong and stable enough to adequately support range. |
|
|
| If floor is sagging or sloping, contact a carpenter to correct the situation. |
|
|
| Kitchen cabinet alignment may make range appear unlevel. Be sure cabinets are square and |
| have sufficient room for range clearance. |
|
|
Cannot move appliance easily. Appliance must be accessible for service.
Cabinets not square or are built in too tightly. Contact builder or installer to make appliance accessible.
Carpet interferes with range. Provide sufficient space so range can be lifted over carpet.
RANGE DOES NOT OPERATE
Entire range or oven does not operate.
Make sure cord/plug is plugged tightly into outlet .
Service wiring is not complete. Contact your dealer, installing agent or authorized servicer.
Power outage. Check house lights to be sure. Call your local electric company for service.
Oven does not operate. | Oven control beeps and displays F1 or F3. Electronic control has detected a fault condition. Push | |
| the CANCEL pad to clear the display and stop the beeping. Reprogram oven. If fault recurs, | |
| record fault number, push CANCEL pad and contact authorized servicer. | |
|
|
|
PRINTED IN CANADA
Avoid Service Checklist
19
