SETTING OVEN CONTROLS
Setting the clock
When the appliance is first powered up or when the power supply to the appliance has been interrupted and restored, the display will flash the time of day. Be sure to set the clock with the correct time of day before using the oven.
To set the clock when the display is flashing:
1.Press 
once. "CLO" will appear in the display.
2.Within 5 seconds, adjust the time by pressing the 
or 
and release the keypad when the correct time
displays. The new setting will accept in 5 seconds.
To adjust the clock when the display is not flashing:
1.Press 
keypad twice (do not hold keypad down). "CLO" will appear in the display.
2.Within 5 seconds, adjust the time by pressing the 
or 
and release the keypad when the correct time displays. Any adjustments made will accept in 5 seconds.
NOTE
The clock cannot be set or adjusted when the oven is active including
Changing between continuous bake setting or
The oven control has a
Changing to continuous bake setting:
1.Press and hold 
keypad for 5 seconds until a
tone sounds. " — — hr" will appear in display for continuous cooking. The current time of day will return to the display.
2.To cancel the continuous bake setting, press and hold
keypard for 5 seconds until a tone sounds.
"12hr" will appear in display indicating that the control has returned to the
NOTE
Changing between continuous bake or
Changing temperature display mode (°F or °C)
The oven control is factory preset to display the oven temperature with Fahrenheit (°F) values. The control may be changed to display either Fahrenheit or Celsius
temperatures.
To change the temperature to display Celsius (°C) or Fahrenheit(°F):
1. Press
keypad. "—
2. Press and hold the | keypad until "HI" appears in the |
display.
3.Press and hold
keypad until °F or °C appears in the display.
4. Press the | or | keypad to change °F to °C or °C |
to °F.
5. Press any keypad to return to normal operating mode.
NOTE
The temperature display mode cannot be changed when the oven or
Setting for audible or silent keypad operation
Normally a beep will sound each time a keypad is pressed. If desired, the oven control may be set for silent keypad operation.
To set for silent operation:
Press and hold the 
keypad until the control beeps
once (about 7 seconds). This will block the controls from sounding when a keypad is pressed in the future.
To set for audible operation:
Press and hold the 
keypad until the control beeps once (about 7 seconds).
NOTE
When the control is set for silent keypad operation the timer, preheat and any end of cycle or any error tone alerts will remain audible.
16
