BEFORE YOU CALL • Solutions to common problems

Problem

Solution

 

 

Soil not completely removed after self- cleaning cycle.

•Failure to clean bottom, front top of oven, frame of oven or door area outside oven seal. These areas are not in the self-cleaning area, but get hot enough to burn on residue. Clean these areas before the self-cleaning cycle is started. Burned-on residue can be cleaned with a stiff nylon brush and water or a nylon scrubber. Be careful not to damage the oven gasket.

Oven smokes excessively during broiling.

• Incorrect setting. Follow broiling instructions in Setting Oven Controls.

 

• Make sure oven door closed.

 

• Meat too close to upper burner. Reposition the broil rack to provide

 

proper clearance between the meat & the burner. Preheat the oven.

 

• Meat not properly prepared. Remove excess fat from meat. Cut remaining

 

fatty edges to prevent curling, but do not cut into lean.

 

• Broiler pan and insert wrong side up and grease not draining. Always

 

place grid on the broiler pan with ribs up & slots down to allow grease to

 

drip into pan (some models).

 

• Grease has built up on oven surfaces. Regular cleaning is necessary when

 

broiling frequently. Old grease or food spatters cause excessive smoking.

 

 

Flames inside oven or smoking from

• Excessive spillovers in oven. For example this will happen for pie

oven vent.

spillovers or large amounts of grease left on the oven bottom. Wipe up

 

excessive spillovers before starting oven. If flames or excessive smoke

 

are present see “Broiling” in the Setting Oven Controls section.

Oven control panel beeps & displays any F code error (for example F10, F11, F13, F14, F15, F30, F31 or F90).

•Oven control has detected a fault or error condition. Press cancel to clear the display & stop beeping. Try the bake or broil feature again. If the F code error repeats, remove power from appliance, wait 5 minutes and then repower appliance and set clock for the time of day. Try the bake or broil feature again. If the fault recurs, record fault and call for service.

Oven light does not work.

•Be sure the light is secure in the socket. Also see “Changing & replacing the oven light” section.

Appliance is not level.

• Be sure floor is level, strong & stable enough to adequately support range.

 

• If floor is sagging or sloping, contact a carpenter to correct the situation.

 

• Poor installation. Place oven rack in center of oven. Place a level on the

 

oven rack. Adjust leveling legs at base of appliance until the rack is level.

 

• Kitchen cabinet alignment may make range appear not level. Be sure

 

cabinets are square & have sufficient room for appliance clearance.

Cannot move appliance easily. Appliance must be accessible for service.

•Cabinets not square or are built in too tightly. Contact builder or installer to make appliance accessible.

•Carpet interferes with appliance. Provide sufficient space so appliance can be lifted over carpet.

26

Page 25 Page 27
Page 26
Image 26
Frigidaire FGGF3030PF important safety instructions Before YOU Call Solutions to common problems
Page 25 Page 27

FGGF3030PF specifications

The Frigidaire FGGF3030PF is a modern freestanding gas range that brings versatility and efficiency to your cooking experience. This appliance combines style, function, and advanced features to help home chefs create culinary masterpieces.

One of the standout features of the FGGF3030PF is its 5-burner cooktop. This design offers a variety of burner sizes, accommodating everything from small saucepans to large stock pots. The large 18,000 BTU burner is perfect for searing and boiling, while the 5,000 BTU simmer burner allows for gentle heat, which is ideal for delicate sauces or melting chocolate. The continuous cast-iron grates provide durability and stability, making it easy to slide pots and pans across the surface without lifting.

The range is equipped with a spacious 5.0 cubic foot oven, which is large enough to handle multiple dishes simultaneously, perfect for family meals or entertaining guests. The oven features even baking technology, ensuring consistent results every time by evenly distributing heat. This is essential for achieving perfectly baked goods and evenly roasted meats.

The Frigidaire FGGF3030PF also boasts a true convection feature, which circulates heated air throughout the oven, reducing cooking time and promoting even browning. This technology is a game changer for busy home cooks, as it allows for faster meal preparation without sacrificing quality.

In terms of design, the stainless steel finish of the FGGF3030PF adds a sleek and modern look to any kitchen. The range is not only aesthetically pleasing, but it is also easy to clean, thanks to the smooth surface and removable grates. The oven door includes a large window, making it easy to monitor your food without opening the door and disrupting the cooking process.

Another notable aspect of the FGGF3030PF is its self-cleaning feature. This convenient option saves time and effort by using high temperatures to burn off food residue, leaving the oven clean and ready for the next meal.

Additionally, the Frigidaire FGGF3030PF is equipped with a built-in timer and multiple oven settings, enabling you to cook a variety of dishes with precision and control. With its blend of advanced features, ample cooking space, and elegant design, the Frigidaire FGGF3030PF is an excellent choice for those looking to enhance their kitchen and cooking experience. Whether you're a novice or an experienced chef, this gas range provides the tools necessary to create delicious meals efficiently.
Top Page Image Contents