Manuals / Frigidaire / Kitchen Appliance / Refrigerator

Frigidaire FGHN2844LP, FGUS2647LF, FGUS2632LE, FGUN2642LP, FGUS2632LP To adjust the flipper mullion

Models: FPHG2399MF FGHG2344MF FGHN2844LF FGHN2844LP FGHN2844LE FGUN2642LF FGUN2642LE FGUS2645LF FGUS2632LP FGUN2642LP FGUS2632LE FGUS2647LF

1 30

Download 30 pages 42.29 Kb

Page 8

INSTALLATION

4Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer counterclockwise (when viewed from the bottom).

Lower

Door

HingeRaise

WasherDoor

Raising/Lowering Door

5Re-tighten the screw (where applicable), ensuring it is between the spokes of the washer. Screw will not be tight, just insert until it is flush with the hinge.

Retighten Screw

Hinge

Washer Spokes

Screw

Screw (where applicable)

To adjust the flipper mullion:

1Loosen the screw located on the flipper mullion hinge.

Flipper

Mullion

Screw

Flipper

Mullion

Hinge

Adjusting Flipper Mullion Screw

2Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or

1.5 mm) between the guide and flipper mullion.

Mullion

Guide

Flipper

Mullion

Thickness

of a Coin

Adjusting Flipper Mullion Height

NOTE

If after adjusting doors higher the door makes a popping/clicking sound, remove screw and replace with the longer one supplied in the handle package (select models).

3Retighten screw.

8

Image 8

Frigidaire FGHN2844LP, FGUS2647LF To adjust the flipper mullion, Loosen the screw located on the flipper mullion hinge

Contents

Use &Care Important Safety Instructions Electrical information Features AT a Glance Features may vary according to model Installation InstallationRequired Tools Location Level Refrigerator & Adjust To level the cabinet using the front rollers select modelsLeveling Freezer Drawer if necessary Doors if necessary To adjust the door stop Door stop is adjustable between 85 to 145 degreesRetighten screw Ensure door stops in desired location To adjust the flipper mullion Loosen the screw located on the flipper mullion hinge Door Removal Instructions Getting through narrow spacesTo prepare for removing the doors To remove the top hinge covers Open freezer drawer Installing Freezer DrawerRemoving Freezer Drawer Installing Door Handles Door Handle Mounting Instructions for Frigidaire Gallery Mounting Refrigerator Handles Connecting the Water Supply Before Installing The Water Supply Line, You Will Need To Connect Water Supply Line To Ice Maker Inlet Valve IQ-TouchTM AlarmsControls IQ-TouchTMSabbath Mode Automatic ICE Maker select models Storage Features Shelf featuresDrawers Crispers Accessories varies by model Dairy compartment Freezer Features varies by modelTo change the position of an adjustable door bin Deli drawer Dividers Removal To Remove Upper BasketTo Remove Lower Basket Storing Food and Saving Energy Normal Operating Sounds and Sights Understanding the sounds you may hear Changing the Filter Air Filter Reset will turn itself off after a few seconds Air Filter Replacement cartridge, PaultraAir filter select models Replacing your PureAdvantageTM air filter Care & Cleaning Protecting your investment Gone a few days Care and cleaning tipsVacation and moving tips Ordering Replacement LED Lights Replacing LED Lights select modelsTo replace LED Lights Replacing Light Bulbs select models Before YOU Call United States Canada Compressor Does not runRefrigerator Runs too much Major Appliance Warranty Exclusions This warranty does not cover the following