Frigidaire FPUH19D7LF, 297298800 important safety instructions Door Removal / Electronic Control

DOOR REMOVAL / ELECTRONIC CONTROL

DOOR REMOVAL

If door must be removed:

•Unplug the unit or switch the breaker that supplies power to the unit to the off position.

•Remove the plastic top hinge cover.

•Hold the door in place while removing the top hinge from the cabinet.

•Remove the two 3/8” hex head bolts from the top hinge with a 3/8” wrench or socket.

•Lift the door upwards and pull up and away from the cabinet until free of the bottom hinge pin mounted on the front of the cabinet.

•To replace the door, reverse the above procedures and securely tighten all screws to prevent hinge slippage.

CAUTION

Doors are heavy. It is recommended to have two people to remove or replace the door assembly from the cabinet.

Hinge Cover

Hinge Bolts (2)

Hinge Plate

SETTING THE PRO-SELECT™ ELECTRONIC CONTROL

Cool Down Period

For safe food storage, allow four (4) hours for freezer to cool down completely. The freezer will run continuously for the first several hours.

Pro-Select™ Electronic Control

The Pro-Select™ Electronic Control is located inside the freezer. Temperature is factory preset to provide satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction.

°F

To adjust the temperature setting, press the UP (▲) key for warmer temperature and DOWN (▼) key for colder temperature on the control panel. Allow several hours for the temperature to stabilize between adjustments. The freezer can be adjusted between -10°F (-23°C) and 10°F (-12°C). By pressing the TEMP MODE key, the temperature display will toggle between °F to °C.

To turn the freezer OFF, press the UP (▲) key until the warmest temperature setting of 10Fº (-12Cº) shows in the display. Then press the UP (▲) key three (3) times within three (3) seconds to turn the freezer OFF. The display will then show “OF”. To turn the unit back ON, press the DOWN (▼) key three (3) times within three (3) seconds. The control will then display “10Fº (-12Cº)” and may be adjusted to the desired temperature.

8