Frigidaire LCRT2010ST service manual Components, Test Procedure, Results, 5-10

COMPONENTS TEST PROCEDURE RESULTS

Antenna

Gasket

Chassis

		Filament
	NOTE: When testing the magnetron, be sure to install the magnetron gasket
	in the correct position and be sure that the gasket is in good condition.
HIGH VOLTAGE	Measure the resistance.	Normal: Momentarily indicates
CAPACITOR	(Ohm-meter scale: Rx1000)	several ohms, and
	• Terminal to terminal.	then gradually returns
		to infinite.

Measure the resistance.	Normal: Infinite.
(Ohm-meter scale: Rx1000)
• Terminal to case.

HIGH VOLTAGE	Measure the continuity (Forward).	Normal: Continuity.
DIODE	(Ohm-meter scale: Rx10000)	Abnormal: Infinite.

NOTE :
Some inexpensive meters
may indicate infinite
resistance in both direction.	Measure the continuity (Reverse).	Normal: Infinite.
	(Ohm-meter scale: Rx10000)	Abnormal: Continuity.

5-10