Frigidaire LCRT2010ST service manual Relay, Power, Level, FAN Motor, Turntable Motor

COMPONENTS	TEST PROCEDURE			RESULTS
RELAY 2	Check for continuity of relay 2 with an		POWER
	ohm-meter.
			LEVEL
	(Remove wire leads from relay 2 and
	operate the unit.)	1		4 sec	18 sec
		2		6 sec	16 sec
		3		8 sec	14 sec
		4		10 sec	12 sec
		5		12 sec	10 sec
		6		14 sec	8 sec
		7		16 sec	6 sec
		8		18 sec	4 sec
		9		20 sec	2 sec
		10		22 sec	0 sec

FAN MOTOR	Measure the resistance.	Normal:
(Wire leads removed)	(Ohm-meter scale: R x 1)	A:Approx. 85	~ 100 ohm.
		B:Approx. 10	~ 25 ohm.
		Abnormal: Infinite or several
		ohm.

TURNTABLE MOTOR

(Wire leads removed)

Measure the resistance. (Ohm-meter scale: R x 1)

Normal: Approx. 100 ~ 150 ohm

Abnormal: Infinite or several ohm.

NOTE : • A MICROWAVE LEAKAGE TEST MUST ALWAYS BE PERFORMED WHEN THE UNIT IS SERVICED FOR ANY REASON.

•MAKE SURE THE WIRE LEADS ARE IN THE CORRECT POSITION.

•WHEN REMOVING THE WIRE LEADS FROM THE PARTS, BE SURE TO GRASP THE CONNECTOR, NOT THE WIRES.

5-11