Chapter 2

Getting Started

This chapter describes how to install the optional accessories on your Frontier Touch Terminal for optimal serviceability.

Pre-installation Notice

Before you start installing your Frontier ULV, please read the following notices carefully.

1.The Frontier ULV does not support PCI slot.

2.Do not plug in or unplug any interior devices, such as memory module or any function card, when the ATX PSU is powered on.

3.The LAN chipset uses RTL 8139/810x family network adapter. The Terminal has be built-in the PXE Boot ROM function within the BIOS to execute Boot ROM already.

4.For installation and compatibility, using the DDR RAM Module from the original manufacturer is recommended.

5.The USB device connector is Hot Swap. Do not plug in or unplug any connectors other than USB devices when the power is on.

6.The spill proof design of Frontier ULV conforms to IP-43 standard.

7.Do not insert or remove any devices or components from the Frontier ULV while the power is on.

Default Setting
Default settings for Frontier Touch Terminal serial ports

COM1

COM2

COM3

COM4

COM 5

COM 6

 

 

 

 

 

 

IRQ 4

IRQ 3

IRQ 5

IRQ 10

IRQ 5

IRQ 10

6