Manuals / Brands / Computer Equipment / Computer Monitor / Frontier Labs / Computer Equipment / Computer Monitor

Frontier Labs Lite/Pro Installing the Customer Display for Lite type, Installing the Customer Display for Pro type

1 20

Download 20 pages, 1.66 Mb

Chapter 2 — Getting Started

Installing the Customer Display for Lite type

Follow the procedures below to install the Customer Display.

1.Connect the VFD DB 9 cable to the connector as shown.

2.Replace the base cover and affix it with two M3 screws.

3.Attach the Customer Display to the base of the Frontier ULV Terminal with two M3 screws.

4.Lock the Customer Display to the customer display pole bracket with two M3 screws.

Installing the Customer Display for Pro type

Follow the procedures below to install the Customer Display.

1.Plug the VFD RJ-45 connector of the Customer Display into the COM5 port.

2.Install the Customer Display and the cover stand in place with three M3 screws.

10

Contents

Page Before You Proceed Power Supply Safety Notes Preface Operating Instructions Maintenance Warning and Attention Federal Communications (FCC Statement) WARNING: Content Welcome Overview of Frontier ULV Rear View OSD Control Buttons Features Unpacking Getting Started Pre-installationNotice Default Setting Limitations Hardware Installation Installing the Adapter and Internet for Lite type Installing the Adapter and Internet for Pro type Installing the Customer Display for Lite type Installing the Customer Display for Pro type Installing the 2nd display (for Pro type only) Installing the MSR LCD Operating Angle Technical Information Specifications Appendix — Technical Information Frequently Asked Questions (FAQ)