Frontier Labs Lite/Pro Installing the Adapter and Internet for Pro type

Chapter 2 — Getting Started

Installing the Adapter and Internet for Pro type

To install the adapter and Internet cable for Pro type, do the following:

1.Take out the cable clamps from the accessory package and attach them to the position as shown. Connect the Internet RJ 45 cable and the power cable to the connectors and arrange the cables in the clamps.

RJ 45				Power adapter
connector				connector
connector				connector

Cable clamp

2.Replace the extension base cover with two M3 screws and then affix the stand cover to the base with three M3 screws.

9

Contents

Page Before You Proceed Power Supply Safety Notes Preface Operating Instructions Maintenance Warning and Attention Federal Communications (FCC Statement) WARNING: Content Welcome Overview of Frontier ULV Rear View OSD Control Buttons Features Unpacking Getting Started Pre-installationNotice Default Setting Limitations Hardware Installation Installing the Adapter and Internet for Lite type Installing the Adapter and Internet for Pro type Installing the Customer Display for Lite type Installing the Customer Display for Pro type Installing the 2nd display (for Pro type only) Installing the MSR LCD Operating Angle Technical Information Specifications Appendix — Technical Information Frequently Asked Questions (FAQ)