Frymaster M2000 operation manual Quick Reference For Programming Codes, Hi-LimitCheck

Quick Reference For Programming Codes

Hi-Limit Check

*Note: For left- side use 8888 and the left 1 & 2 buttons)

1.Press .

2.Computer displays OFF.

3.Press .

4.CoDE shows in the left display.

9 9 9 9

5. Press YZ- YZ- YZ- YZ- (9999*) for full vat or right side of split pot. Note: The test can only be conducted with the oil above 180°F (82°C). If the shortening temperature is below 180°F (82°C), the computer will display TOO COLD.

6.HI-LIMITshows in the right display.

7. Press and hold	1
	right cook channel key.

8.Fryer will call for heat and illuminates.

9.Right display will alternate between HI-limitand the temperature until shortening reaches 410°F (210°C). Then the display changes, alternating between Hi-1and the temperature.

10.Heat is turned off now and hi-1 test is complete.

	2
11. Press and hold right	, which starts Hi-Limit 2 test.

12.The display will alternate between Hi-Limitand the temperature display until the hi-limit opens. The display will show Hi-2.

13.Press to clear test and turn computer off.

14.Failure of the Hi-Limit 2 test is indicated by an alternating display of HI-2and BAD. Call for service immediately if this occurs.

8-4