Inserting a Memory Card

■ Inserting a Memory Card

1 Open the battery-chamber cover.

1Note

Be sure the camera is off before opening the battery -chamber cover.

2 Insert the memory card.

Holding the memory card in the orientation shown below, slide it in until it clicks into place at the back of the slot.

Click

Be sure card is in correct orienta- tion; do not insert at an angle or use force.

3 Close the battery-chamber cover. Close the battery-cham-

ber cover and slide it in until the latch clicks into place.

Removing Memory Cards

After confirming that the camera is off, press the card in and then release it slowly. The card can now be removed by hand.

3Cautions

•The memory card may spring out if you remove your finger immediately after pushing the card in.

•Memory cards may be warm to the touch after be- ing removed from the camera. This is normal and does not indicate a malfunction.

Steps First

11