Parts of the Camera

The Command Control

Pressing the command control left or right performs the same function as rotating the command dial. It can also be used to choose a combination of shutter speed and aperture (program shift; P36) or to adjust aperture in increments of

1/3 EV (P38, 39).

You can also press the center of the command control to zoom in on the focus area selected in the electronic viewfinder or LCD monitor, or to zoom in on the active focus point during playback or (if CONTINUOUS is selected for ASCREEN SET-UP> IMAGE DISP. in the setup menu; P90) image review (press again to cancel zoom).

Silent Mode

In situations in which camera sounds or lights may be unwelcome, press the DISP/BACK button until the o icon is displayed (about a second), or select ON for oSILENT MODE in the setup menu (P88). The camera speaker, flash, and AF-assist illuminator/self- timer lamp turn off and flash and volume settings can not be adjusted (note that silent mode can not be enabled or disabled while movie playback is in progress). Press the DISP/BACK button again to resume normal operation.

Begin You Before

5