Continuous Shooting (Burst Mode)

Capture motion in a series of pictures.

1 Press the DRIVE button to display drive op- tions. Press the command dial up or down to highlight I (CONTINUOUS), and the options shown below will be displayed.

2 Press the command dial right or left to choose from frame rates of approximately 6.0 fps (frames per sec-

ond) and 3.0 fps. Press MENU/OK to proceed when settings are complete.

3 Press the shutter button halfway to focus.

4 Press the shutter button the rest of the way down to start shoot- ing. Shooting ends when the shutter button is released, the selected number of pictures has been taken, or the memory card is full.

R Focus and exposure are determined by the first frame in each series. The flash turns off automati- cally; the previously-selected flash mode is restored when burst shooting is turned off .

RFrame rate varies with shutter speed and may slow as more shots are taken.

RAdditional time may be required to record pictures when shooting ends.

R If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder (P89).

RIn some drive modes, shooting may not begin if the space available on the memory card is insufficient.

58