Panoramas

Follow an on-screen guide to create a panorama.

1 Press the DRIVE button to display drive op- tions. Press the command dial up or down to highlight r(MOTION PANORAMA) and press MENU/OK.

2 To select the size of the angle through which you will pan the camera while shooting, press the command dial left. Highlight a size and press MENU/OK.

3 Press the command dial right to view a choice of pan directions. Highlight a pan direction and press MENU/OK.

4 Press the shutter button all the way down to start recording. There is no need to keep the shutter button pressed during recording.

5 Pan the camera in the direction shown by the arrow. Shooting ends automatically when the camera is panned to the end of the guides and the panorama is complete.

RShooting ends if the shutter button is pressed all the way down during shooting. No panorama may be recorded if the shutter button is pressed before the panorama is complete.

The size of the completed panorama varies with the angle and pan direction.

Angle

Pan direction

Size (W × H)

120°

Horizontal

6,440 × 1,440

Vertical

2,160 × 6,440

 

180°

Horizontal

9,600 × 1,440

 

 

Vertical

2,160 × 9,600

 

60