Inserting the Battery and a Memory Card

Removing the Battery and Memory Card

Before removing the battery or memory card, turn the camera off and open the battery-chamber cover.

To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown.

Battery latch

To remove the memory card, press it in and release it slowly. The card can then be removed by hand. When a memory card is removed, the card could be

ejected too quickly. Use your finger to hold it and gently release the card.

QBatteries

•Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could prevent the battery from charging.

•Do not affix stickers or other objects to the battery. Failure to observe this precaution could make it im- possible to remove the battery from the camera.

•Do not short the battery terminals. The battery could overheat.

•Read the cautions in “The Battery and Power Supply” (Piv).

•Use only battery chargers designated for use with the battery. Failure to observe this precaution could re- sult in product malfunction.

•Do not remove the labels from the battery or attempt to split or peel the outer casing.

•The battery gradually loses its charge when not in use. Charge the battery one or two days before use.

14