2
3736
Switch off the camera and TV. Plug the A/V
cable (accessory) into the A/V OUT (audio-visual
output) socket on the camera.
Plug the other end of the cable into the
audio/video input socket on the TV. Then switch
the camera and TV on and take pictures or play
back images as you would normally.
USING A TV MONITOR
!
If you connect the A/V cable during playback, you
will not hear the sound from the TV.
!
If you disconnect or reconnect the A/V cable while
the power is switched on, the sound may not be
output correctly.
!
If there is a power outlet available, connect the
AC-3V AC Power Adapter.
!
If your TV has stereo audio input sockets, plug the
cable into the left (white) socket.
!
Refer to the instructions provided with your TV for
more information on audio and A/V input for your TV.
A/V OUT socket
Video (yellow)
Audio (white)
To terminals
21

ERASING SINGLE FRAME

4
Press d or c button to display the image to
be erased.
Press the MENU/OK button to erase the
displayed image. When erasing is complete, the
next image appears and the “”
message is displayed.
ERASE OK?
!
To cancel single-frame erase, press the BACK
button to return to the menu. To exit the menu
screen, press the BACK button again.
!
If “” is displayed, the image
protection must be removed to erase the image
(P.62).
!
If the “” message is displayed, DPOF
is specified. When you press the MENU/OK button,
the image is erased and the DPOF settings are
updated.
DPOF SPECIFIED.
ERASE OK?
PROTECTED FRAME
3
To continue erasing images, repeat the
procedure from step .
3