88 89
6
89
21
➀Set the Mode dial to “0”.
➁If you press the “MENU/OK” button, the menu
screen will appear on the LCD monitor.
➂Use “d” or “c” to select “MODE” and then
use “a()” or “b()” to select “SET-UP”.
➃Press the “MENU/OK” button.
➀Use “a()” or “b()” to select the item.
➁Then use “d” or “c” to change the setting.
●
➀●
➁
●
➀●
➁●
➃88
SET-UP MODE
e
The table below explains the camera setting
6
Setting
SET [OK]
END Confirms the settings and exits setup.
YES/NO YES
AUTO POWER
OFF
Use this setting to specify whether the camera
automatically switches off if it is left unused for 2
minutes. Note that the Auto Power Off function does
not operate during Auto Play or when a USB
connection is being used.
HIGH/LOW/OFF HIGH
BEEP Selects the volume of the beep sound emitted when
camera controls are used.
SET [OK]
DATE/TIME Allows you to set the date and time. See P.19 for
details.
RENEW/CONT RENEW
FRAME NO. Selects whether the frame number memory function is
used. See P.90 for details.
Item Display
Factory Default
Details
●
!
Press the “MENU/OK” button to select “Set Date/
Time”. See P.19 for details.
●
➂