80
5
81
USING AUDIO (REMOTE CONTROL BOTTOM VIEW)Clip
BASS button
MODE button
HOLD switch
Mode display
BASS indicator
Battery charge indicator
(P.18)
Playback indicator
Track No./
Volume/
Information display
Audio mode icon
Press the “w” button.
✽The Mode button sequentially from Normal ➝Repeat All
Tracks ➝Repeat Track each time you press the button.
●Normal: Stops when all the tracks have been played.
●Repeat All Tracks: Plays all the tracks repeatedly.
●Repeat Track: Plays the currently displayed track
repeatedly.
Repeating the per-
formance (listening
to the same track
repeatedly)
Emphasizing low
tones (to listen to
particularly serious
and intense music)
●Normal: None
●Bass 1: d
●Bass 2: e
●Normal: None
●Repeat All Tracks: u
●Repeat Track: v
Press the “BASS” button.
✽The BASS button sequentially from Normal ➝Bass 1 ➝
Bass 2 each time you press the button. “Bass 2” gives
greater emphasis to bass sound.
✽If the sound is distorted, lower the volume.
Preventing erroneous
use (preventing
buttons from being
pressed in error)
If you use one of the buttons
when HOLD is set, “HLD”
appears on the display and
no operation is performed.
Slide the “Hold” switch in the “” direction. To release
the hold, slide the switch back to its original position.
✽The HOLD setting disables all remote control operations.
Selected Function
Remote Control Operation LCD Display
●
!
If you disconnect the remote control during audio playback, the FinePix40i continues in playback mode and will
deplete the batteries. Always switch the FinePix40i off when you are not using the audio functions.
●
!
If you have disconnected the remote control, the power for shooting or playback will not switch on for at least
5 seconds.
●
!
Some noise may occur when the remote control is used. This is normal and does not indicate a fault.