84
5
85
NOTES ON THE REMOTE CONTROL WARNINGS AND AUDIO USB CONNECTION/DOWNLOADING DATANo SmartMedia is loaded, or it is
loaded incorrectly.
Load a SmartMedia or reload the SmartMedia
the correct way round.
The SmartMedia is not formatted. Format the SmartMedia.
• The SmartMedia terminals are soild.
• The SmartMedia is damaged.
• The SmartMedia format is incorrect.
Wipe the contact area on the SmartMedia with
a soft dry cloth. It may be necessary to format
the SmartMedia. If the error message is still
displayed, replace the SmartMedia.
The SmartMedia is write-protected. Use a SmartMedia that is not write-protected.
The SmartMedia is fully recorded. Erase some images or use a SmartMedia that
has ample free space.
The frame number has reached 999-
9999.
Switch the Frame NO. Memory function off and
use a formatted SmartMedia to take the picture.
No audio data Audio cannot be played back.
An attempt was made to playback a
frame not recorded on this camera.
Images cannot be played back.
eThe table below shows some of the warning displayed on the remote control LCD panel.
■Notes on Using the Audio Functions
•Do not use while moving.
Never use the headphones, try to operate the FinePix40i or look at the display screen while you are driving a car or
other vehicle as this could cause a traffic accident. When you are using the FinePix40i while walking, pay close
attention to surrounding traffic and the condition of the footpath.
•Do not use the FinePix40i at high volume for long periods and do not turn the volume up high when you begin listening.
Listening to audio at high volume for long periods can adversely affect your hearing. Also, your ears can be
damaged by sudden exposure to loud noise. Increase the volume gradually.
1
➀Insert the SmartMedia.
➁Switch the camera on and set the Mode dial
to “1”.
●Use the cable provided to connect the camera
to a personal computer and download image
data from the camera to the computer. Note
that you can upload audio data from a personal
computer to the camera.
●The software runs on Windows 98 (including the
second edition), Windows 2000 Professional
and Mac OS 8.5.1 to Mac OS 9.0 Note that your
PC must be equipped with a USB port. (The
software is not guaranteed to run on home-
made PCs.)
●
!
The Auto Power Off function does not operate when
the camera is connected to a PC.
●
!
It is best to use AC Power Adapter AC-3V (sold
separately) for this operation. Power loss during data
transmission will prevent the image data from being
downloaded correctly.(
➡
P.14)
●
➀●
➁