FujiFilm A470 éFRAME NO, ãPLAYBACK VOLUME, ■SET-UPmenu options

SET-UP ✽ How to use the SET-UP menu (➡P.74)

✽How to use the SET-UP menu (➡P.74)

■SET-UP menu options

	Settings	Display	Factory default	Explanation	page
				Specifies whether an image checking screen (photography
	áIMAGE			result) appears after taking a picture.
		3 SEC/1.5 SEC/OFF	1.5 SEC	The image appears for a few moments and is then recorded.	–
	DISP.
				The color tones in images recorded may differ from actual
				color. Play back the recorded images to check them.
	äSHUTTER	OFF/1/2/3	2	Sets the volume of the sound emitted when the shutter operates.	–
	VOLUME
1 àBEEP		OFF/1/2/3	2	Sets the volume of the tone emitted when the camera	–
	VOLUME			controls are used.
	ãPLAYBACK	SET	7	Sets the volume of playing back movie and voice memo.	77
	VOLUME
	éFRAME	CONT./RENEW	CONT.	Specifies whether frame numbers are assigned	77
	NO.			consecutively from previous numbers or begin again.
	êLCD	SET	0	Sets the LCD monitor brightness.	78

ãPLAYBACK VOLUME

0 1 2 3 4 5 6 7 8 9 10

SET CANCEL

01 02

Adjust volume while playing back movie and voice memo.

1Press “d” or “c” to adjust the volume. The larger the number, the larger the volume is emitted. “0” indicates a sound deadening.

2Press the “MENU/OK” button to confirm the new setting.

BRIGHTNESS
ëDIGITAL	ON/OFF	OFF	Specifies whether digital zoom is used together.	78
ZOOM
îAUTO	5 MIN/2 MIN/OFF	2 MIN	Sets the time of turning camera off when camera is not	79
POWER OFF			used.

éFRAME NO.

<CONT. > < RENEW >

Specifies whether frame numbers are assigned consecutively from previous numbers or begin again.

2	ÎLCD POWER	ON/OFF	ON	Darkens the LCD monitor when camera is not used.	79
	SAVE
	ïFORMAT	OK	–	Erases all files.	80

A

0001 0001

0005 0005

CONT.: Pictures are stored beginning from the highest file number stored on the last xD- Picture Card or internal memory used.

ìDATE/TIME	SET	–	Corrects the date or time.	16
óTIME	SET	–	Specifies the time difference settings.	80
DIFFERENCE

B

0006 0001

0010 0005

RENEW: Pictures are stored on each xD-Picture Card beginning with a file number “0001”.

Setting this function to “CONT.” makes file management easier as it makes sure that file

ô			ENGLISH	Specifies the language used for LCD monitor display.		18
				¶: DSC (Mass storage device) mode
				Provides a simple way to read images from an xD-Picture		92
				Card or internal memory and store images onto an xD-
	òUSB	¶/®	¶	Picture Card or internal memory.
	MODE			®: PictBridge
3
				If a printer that supports PictBridge is available, images can		88
				be printed by connecting the camera directly to the
				PictBridge-compatible printer without a PC.
	õVIDEO	NTSC/PAL	–	Specifies whether video output is set to NTSC or PAL.		–
	SYSTEM
				Resets all the camera settings (other than the DATE/TIME,
				TIME DIFFERENCE,	and VIDEO SYSTEM) to
	úRESET	OK	–	the factory default values set at shipment. A confirmation		–
				message appears when you press “c”. To reset the camera
				settings, press the “MENU/OK” button.

●! Always turn the camera off when replacing the battery. Opening the battery cover or disconnecting the AC power adapter without turning the camera off may cause the camera settings to revert to the factory default values set at shipment.

Formatted xD-Picture Card or

internal memory used for both A and B.

100-0009

Directory number

File number

Frame number

2/24/2006 10:00 AM

names are not duplicated when images are downloaded to a PC.

●! When the camera settings are “ú” RESET, the frame number setting (“CONT.” or “RENEW”) is changed to “CONT.” and the frame number itself does not return to “0001”.

●! When the xD-Picture Card or the internal memory already contains image files with file numbers higher than the highest file number on the last xD-Picture Card or internal memory, images are stored beginning from the highest file number on the current xD-Picture Card or internal memory.

Check the file number by viewing the image. The last 4 digits of the 7-digit number in the top right corner of the LCD monitor are the file numbers, while the first 3 digits show the directory number.

●! When changing the xD-Picture Card, always turn the camera off before opening the battery cover. Opening the battery cover without turning the camera off may cause the frame number memory to not function.

●! File number runs from 0001 to 9999. Once 9999 is exceeded, the directory number changes from 100 to 101. The maximum number is 999-9999.

●! The displayed frame number may differ for images photographed on other cameras.

●! When [FRAME NO. FULL] appears, see P.104.

4

Settings

76 77