TURNING ON AND OFF
SETTING THE DATE AND TIME | ✽ Correcting the date and time (➡P.16) |
|
Press the “POWER” button down fully to turn the camera on.
Press the “POWER” button again to turn the camera off.
The lens moves when the camera is in Photography mode. Take care not to obstruct the lens. Obstructing the lens will cause damage. When this occurs, [FOCUS ERROR] or [ZOOM ERROR] appears. Take care also not to get fingerprints on the camera lens as this will result in impaired image quality in your shots.
1
DATE/TIME NOT SET
SET 
NO
When using the camera for the first time after purchasing, the date and time are cleared. Press the “MENU/OK” button to set the date and time.
●! The message appears when the camera has been left for a long period.
●! To set the date and time later, press the “DISP/BACK” button. ●! If you do not set the date and time, this message will appear
each time you turn the camera on.
Press the “w” button for about 1 second to turn the | ||
camera on in Playback mode. | ||
|
Photography ba Playback | Press the “w” button during shooting to change to | |
Playback mode. | ||
| ||
| Press the “w” button again to return to | |
| Photography mode. | |
| ●! Press the shutter button or turn the Mode switch to return to | |
| Photography mode. |
When the Auto power off function is active, if the camera is left unused for 2 or 5 minutes, this function turns the camera off (➡P.79). To turn the camera back on, press the “POWER” button. To play back images, hold down the “w” button for about 1 second.
2
DATE/TIME
2008
2007
YY.MM.DD | 2006 1 . 1 | 12 : 00 |
| 2005 | AM |
| 2004 |
|
SET | CANCEL |
|
01 | 02 |
|
3
DATE/TIME
02
01
YY.MM.DD 2006. 2. 24 10 00
AM 59 58
SET 
CANCEL
1Press “d” or “c” to select Year, Month, Day, Hour or Minute.
2Press “a” or “b” to correct the setting.
●! Holding down “a” or “b” changes the numbers continuously. 
●! When the time displayed passes “12”, the AM/PM setting
changes.
Once you have set the date and time, press the “MENU/OK” button. Pressing the “MENU/OK” button changes the camera to Photography or Playback mode.
●! At the time of purchase and after leaving the camera for a long period, settings such as the date and time are cleared. Once the AC power adapter has been connected or the fully charged battery has been installed for 10 hours or more, the camera settings will be retained for roughly 24 hours even if both sources of power are removed.
1
Ready Getting
14 | 15 |