
✽ How to use the | |
|
|
✽ How to use the
ê LCD BRIGHTNESS |
- 5 | 4 | 3 | 2 | 1 | 0 | 1 | 2 | 3 | 4 | 5 + |
SET
CANCEL
To adjust LCD monitor brightness:
1Press “d” or “c” to adjust the LCD monitor brightness.
2Press the “MENU/OK” button to confirm the new setting.
AUTO POWER OFF |
|
| |||
|
|
|
|
| |
|
|
|
|
| |
1 | : OFF | 5 |
| ||
: : 2 MIN | MIN | ||||
2 | |||||
: ON |
| 2 | MIN | ||
3 | : OK |
| OFF | ||
|
|
|
| ||
| : SET |
|
|
| |
| : SET |
|
|
| |
|
|
|
|
|
When this function is active and the camera is left unused for 2 or 5 minutes, it turns camera off. Auto power off function prevents leaving the power on.
●! The Auto power off function is disabled during automatic playing back and when a USB connection is being used.
01 02
DIGITAL ZOOM
1 : OFF
ON
: 2 MIN OFF
2 : ON
: OK |
Use this function to control the digital zoom.
When zooming changes between optical and digital, the position of the “■” indicator stops. Press the same Zoom button again to start the “■ ” indicator moving again.
Press the “POWER” button to turn the camera back on for shooting.
Hold down the “w” button for about 1 second to play back images.
3 |
| |
: SET | ||
| ||
| : SET |
Zoom bar display
Optical zoom | Digital zoom |
The position of the “ ” indicator on the zoom bar shows the zooming status.
The area to the right of the separator indicates digital zooming, while the area to the left indicates optical zooming.
●! If the shot goes out of focus during zooming, hold the shutter button down halfway to refocus the shot.
hOptical zoom focal length✽Approx. 35 mm to 105 mm, max. zoom scale: 3⋅
hDigital zoom focal length✽Approx. 105 mm to 462 mm, max. zoom scale: approx. 4.4⋅
✽ 35 mm camera equivalents
Using the digital zoom allows you to enlarge your subject and shoot it. However, it will lower your image quality. Set the digital zoom when requiring it.
LCD POWER SAVE |
| |
1 | : OFF |
|
: 2 MIN |
| |
|
| |
2 | : ON | ON |
3 | : OK | OFF |
: SET |
| |
|
| |
| : SET |
|
When this function is active, you can save power and get the maximum possible running time from your battery.
The LCD monitor darkens when camera is not used for 10 seconds.
● | 4 | |
! The LCD power save function is disabled in automatic playing |
| |
back and movie mode. | Settings | |
When the LCD monitor is dark, pressing the shutter | ||
| ||
button down halfway recovers the LCD monitor |
| |
brightness. |
| |
●! Pressing any other button as well as the shutter button wakes |
| |
the camera up. |
|
78 | 79 |