5.2 INSTALLATION ON A Mac OS X

The “FinePixInstallOSX” window appears.

8 Click the [Install] button to install FinePixViewer and RAW FILE CONVERTER LE.

The ImageMixer VCD2 LE for FinePix installer automatically starts up and a window showing

9 the installation progress appears (Installation may take several minutes).

The “FinePixViewer installation completed” message dialog appears. Then click exit button and

10close it.

! When Safari is used as the Web browser, a message may be displayed and the CD-ROM may not be removed. If this happens, click the Safari icon in the Dock to make Safari the active application and then select “Quit Safari” in the “Safari” menu to shut down Safari.

11Launch “Image Capture” from the “Applications” folder.

Change the Image Capture settings.

12Select “Preferences...” from the “Image Capture” menu.

13Select “Other...” from “When a camera is connected, open”.

Select “FPVBridge” from “FinePixViewer” folder in

14the “Applications” folder and click the [Open] button.

6 Viewing Images 6.1 CAMERA CONNECTION

6.1.1 Using the AC power adapter

Always use a FUJIFILM AC Power Adapter AC-5VX (sold separately) (P.99).

Use the AC power adapter to prevent losing power at inconvenient times, such as when downloading photographed images to your PC. You can take pictures and play back images without worrying about depleting the battery.

! Only connect or disconnect the AC power adapter when the camera is off.

Connecting or disconnecting the AC power adapter while the camera is turned on temporarily interrupts the power supply to the camera, so that images or movies being shot at the time are not recorded. Failing to turn the camera off first can also result in damage to the xD-Picture Card or malfunctions during PC connection.

DC IN 5V socket

Check that the camera is off. Plug the AC power

adapter connector into the “DC IN 5V” socket and

 

 

then plug the AC power adapter into the power

 

outlet.

 

! The socket-outlet shall be installed near the equipment and

 

shall be easily accessible.

 

! The shape of the plug and socket-outlet depends on the

 

country of use.

 

! See P.102 for notes on using the AC power adapter.

6.1.2 Connecting to a TV

 

1

 

Turn off the camera and TV. Plug the A/V cable

DC IN 5V socket

(included) into the “A/V OUT” (Audio / Visual

 

 

 

output) socket.

 

A/V OUT

! Plug the A/V cable (included) and the AC power adapter

 

correctly and push them in each terminal.

 

(Audio / Visual output)

 

! When there is a power outlet available, connect the AC

 

socket

 

Power Adapter AC-5VX (sold separately).

 

 

2

 

Plug the other end of the cable into the audio /

Video (yellow)

video input socket on the TV. Then turn the camera

 

 

and TV on and take pictures or play back images

 

To terminals

normally.

 

! When connecting the A/V cable (included) to TV, the LCD

 

 

 

Audio (white)

monitor is turned off. However, during movie recording, movie

 

images appear on the LCD monitor. The movie images

 

 

cannot be shown on a TV.

 

 

! Refer to the instructions provided with your TV for more

 

 

information on audio/video input for your TV.

 

 

! The image quality for movie playback is lower than for still

 

 

images.

6

Images Viewing

86 15Select “Quit Image Capture” menu in the “Image Capture” menu.

87