Attaching the Stand

Attach the stand to the frame.

1Place a towel or other soft cloth on a level surface such as a table and place the viewer face down on the cloth.

2Gently screw the stand into the hole on the back of the viewer as shown.

②

①

3Stand the viewer as shown.

Wide orientation

Tall orientation

1Note

The stand can be used in tall orientation when viewing Dimages, but must be in wide orientation to provide a Ceffect with Cimages. Tall orientation pictures can be rotated for display in wide orientation using the ORIENTATION option in the setup menu.

3Caution

The viewer should only be used on a table or other fl at horizontal surface; do not hang the viewer from a picture hook or mount it on a wall or other vertical surface using double-faced tape.

2Tip: The Tripod Mount

The viewer can also be placed on a tripod using the tripod mount.

Steps First

7