Connecting to a Computer

Copying Pictures to the Viewer

1Turn the viewer off and connect the supplied USB cable as shown, making sure the connectors are fully inserted (the orientation and location of the computer connector may differ from that shown; consult the computer manual for details). Connect the viewer directly to the computer; do not use a USB hub or keyboard.

Mini-B USB plug

②

①

Computer USB connector

USB cable

3Caution

Do NOT connect the cable while the viewer is on.

2Turn the viewer on and follow the on-screen instructions to copy pictures.

1Notes

•The computer may require some time to register the viewer with the system the fi rst time it is connected.

•Viewer controls can not be used while the viewer is connected to a computer.

3When transfer is complete, follow the on-screen instructions to turn the viewer off and disconnect the USB cable.

3 Caution

Do not disconnect the cable during transfer. Failure to observe this precaution could result in loss of data.

Uninstalling FinePixViewer

Only uninstall FinePixViewer before reinstalling the software or when it is no longer required. After quitting FinePixViewer and disconnecting the viewer, open the control panel and use “Pro- grams and Features” (Windows Vista) or “Add or Remove Programs” (other versions of Windows) to uninstall FinePixViewer, FinePix Resource, and FinePix Studio. One or more confi rmation dialogs may be displayed; read the contents carefully before clicking OK.

Connections

25