Copying Pictures via Infrared

Pictures can be copied to internal memory from compatible devices when the viewer is in single-image display mode. The viewer will automatically receive pictures transferred from the device; no other operation is required.

1Place the viewer about 5 to 20 cm (2 to 8 in.) from the other device with the infrared ports pointing directly at each other. The ports should be at no more than a

15 ° angle.

2Transmit pictures from the other device (see the manu- al supplied with the device for details). The viewer will

display a message stating that it is receiving data via infrared and pictures will be displayed in the viewer as they are received.

3Caution

If no pictures are received, make sure that there are no obstacles between the two devices and that the infrared ports are correctly aligned and are not in direct sunlight or directly under a fl uo- rescent light. Remote controls and other infrared devices and equipment that generates electrical noise may interfere with transmission.

Saving Transferred Pictures

If DISP. & SAVE is selected for IR COMMUNICATION in the setup menu (pg. 22), transferred pictures will automatically be saved in internal memory after being displayed in the viewer.

Connections

23