| Problems and Solutions | ||
|
| ||
Problem | Solution |
| |
Sounds made by the | • uCONTINUOUS is selected for FMOVIE AF MODE: Select a different AF mode |
| |
(P91). | |||
camera are recorded with | |||
• Zoom was adjusted during shooting: Do not adjust zoom during shooting. | |||
movies. | • Intelligent Face Detection is on: Turn Intelligent Face Detection off (P41). |
| |
| |||
Playback
Problem |
| Solution | |
Pictures are grainy. | The pictures were taken with a different make or model of camera. | ||
No sound in movie | • | Playback volume is too low: Adjust playback volume (P105). | |
• | The microphone was obstructed: Hold the camera correctly during recording (P18, 38). | ||
playback. | |||
• | The speaker is obstructed: Hold the camera correctly during playback (P68). | ||
| |||
Selected pictures are not | Some of the pictures selected for deletion are protected. Remove protection using the device with | ||
deleted. | which it was originally applied (P96). | ||
File numbering is | The | ||
unexpectedly reset. | opening the | ||
Connections/Miscellaneous
Problem |
| Solution |
| • | The camera is not properly connected: Connect the camera properly (P69). |
| • | An A/V cable was connected during movie playback: Connect the camera once movie play- |
|
| back has ended. |
No picture or sound. | • | Input on the television is set to “TV”: Set input to“VIDEO”. |
| • | The camera is not set to the correct video standard: Match the camera QVIDEO SYS- |
|
| TEM setting to the TV (P109). |
| • | The volume on the TV is too low: Adjust the volume. |
No color | Match the camera QVIDEO SYSTEM setting to the TV (P109). | |
Troubleshooting | 119 |