GPS Tracking

To record a GPS track log to a file on the memory card, select ON for RSET-UP> TRACKING DATA (P85; be sure the clock is set to the correct time and date as described on page 16). A new log file is created when ON is selected and once every 24 hours thereafter. Note that the camera will continue to update GPS data even when off, increasing the drain on the battery.

QGPS logs can be viewed in MyFinePix Studio. Q See “GPS” (P60) for information on using GPS.

Q The indicator lamp glows orange during recording GPS data even when the cam- era is turned off while ON is selected. Select OFF before removing the battery or memory card. Failure to observe this precaution could damage the card.

Q Signal strength will be displayed in yellow and GPS data will not be logged if the battery is low (Bor less), no memory card is inserted, or the memory card has less than 32 MB free. To resume the log, select ON after inserting a charged battery or a memory card with more than 32 MB free.

Q GPS tracking may be interrupted during movie recording and playback.

Using GPS to Set the Camera Clock

The AUTO TIME CORRECTION item in the RSET-UPmenu can be used to synchronize the camera clock to the time provided by GPS satellites. Select ON (W/o SUMMERTIME) to set the clock to local standard time or ON (W/ SUMMERTIME) to set the clock to local daylight saving time. If daylight saving time is in effect, time will automatically be advanced one hour.

QSelecting gLOCAL for NTIME DIFFERENCE turns AUTO TIME CORRECTION off. Note that GPS may not provide the correct time in some locations; if necessary select OFF for AUTO TIME CORRECTION and set the clock using FDATE/TIME (P102).

GPS

61