101
8
3. Select “User’s registration” and click the
[OK] button.
✽If you are not already connected to the Internet,
connect now. (A dial-up dialog box may be
displayed.)
✽Only select menu acquisition if you have already
completed the user registration process and you
have re-installed “FinePixViewer”, etc.
4. The User’s Registration
dialog box opens.
Select the country or
area where you are
living and click the
[OK] button.
✽The actual user registration page may differ slightly
in appearance from the sample shown here.
✽If the country or area where you are living does
not appear in the pull-down list, select “OTHERS”.
5. When the browser starts up, proceed as
directed by the on-screen instructions.
6. Enter the required information in the user
registration page.
1Enter the name of your choice (nickname, etc.).
2Enter a password of your choice using letters
and/or numbers. Then enter the password again
for confirmation.
3Enter your name.
4Enter your E-mail address.
5Enter the remaining required information.
✽After you register, a confirmation E-mail message
is sent to you. Be sure to enter a valid E-mail
address at which you can receive the message.
✽The actual user registration page may differ slightly
in appearance from the sample shown here.
7. When you have entered all the required
information, click the [Register] button at
the bottom of the page.
Once you complete the registration, a confirmation
E-mail is sent. Wait a few moments until the
message is sent.
1
2
3
4