119
Problem Cause Remedy
Nothing happens when I
use the Mode dial.
iCamera malfunction.
iThe batteries exhausted.
iBriefly remove the batteries or
disconnect the AC power adapter. Then
reload the batteries or reconnect the AC
power adapter and try again.
iReplace with new batteries.
When the camera is
connected to a personal
computer (PC), the shot
image appears on the
camera's LCD monitor.
iThe special USB cable is not connected
correctly to the PC or camera.
iThe PC is not switched on.
iSet up the camera and USB cable
correctly.
iSwitch the PC on.
The camera no longer
works correctly.
iThe camera has suffered an unforeseen
problem.
iRemove the batteries briefly and then
reload the batteries and try again.
The ERASE ALL function
does not erase all the
frames.
Frame erase does not
erase the frame.
iSome frames may be protected. iUnprotect frames using the camera on
which the protection was first applied.