73
5
■SET–UP Menu Options (Date/time setting, etc.)Settings Display Explanation
POSTVIEW
USB MODE
POWER SAVE
DATE/TIME
ON/OFF
DSC/PC CAM
ON/OFF
SET
This option specifies whether or not an image checking screen
(photography results) is displayed after you take a shot.
The photographed image is displayed for a few moments and then
automatically recorded.
See P.75 for details.
If the camera is not used for approximately 30 seconds, this function
temporarily switches off the LCD monitor. See P.74 for details.
Use this option to correct the date or time. See P.15 for details.
Factory
default
ON
DSC
ON
—
QLCD ON/OFF Use this option to specify whether the LCD monitor is automatically
switched ON or OFF when the Mode dial is set to “Q”.
ON
BEEP FLOW/HIGH/OFF Allows you to set the camera’s operating sound.
LOW
RESET ALL OK
This resets all the camera settings (including the photography and
playback menu settings) other than DATE/TIME and LANGUAGE to the
factory default values set at shipment.
—
LANGUAGE
ENGLISH/FRANCAIS/
DEUTSCH
Select English, French or German as the language used for screen
display.
ENGLISH
■List of SettingsThe options available in the settings menus vary depending on the mode, as shown in the table below.
AAUTO
SMANUAL
LCD BRIGHTNESS (P.71)
SET–UP
QStill Photography mode
—
—
LCD BRIGHTNESS (P.71)
SET–UP
TMovie mode
—
—
LCD BRIGHTNESS (P.71)
SET–UP