89
7
Camera Operation
iWhen the camera and computer are exchanging
data, the self timer lamp flashes and the
viewfinder lamp flashes alternately green and
orange.
iDSC appears on the screen.
iPower Save and Auto Power Off are disabled
during USB connection.
Before replacing the xD-Picture Card, always
disconnect the camera from the PC using the
procedure on P.94.
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.94 for information
on the disconnection procedure.
PC Operation
The Windows CD-ROM may also be required
during installation. In this event, switch CD-ROMs
as directed by the on-screen instructions.
iFinePixViewer automatically starts up.
Windows 98/98 SE/Me/2000 Professional
iA removable disk icon appears and you can
use your PC to transfer files to and from the
camera.
Windows Macintosh
Screen for
Windows 98 SE
If the above operations do not occur, you do not
have the required software programs or drivers
installed on your PC. Complete the required PC
setup procedures. Then reconnect the camera
to your PC.