Connecting to a PC

CAUTION

FinePix S8000fd is compatible with PTP (Picture Transfer Protocol)/MTP (Media Transfer Protocol). A PTP/MTP-compatible camera is a camera that can recognize the PC and printer automatically when connected.

Do not disconnect the USB cable (included) when the camera is communicating with a PC. If the USB cable (included) is disconnected during communication, the files on the Memory Card or internal memory may be damaged.

In Mac OS X, you must set automatic setup the first time you connect the camera to your PC.

When the camera and PC are exchanging data, the indicator lamp blinks alternately green and orange.

Auto power off is disabled during USB connection.Before replacing the Memory Card, always disconnect the camera from the PC.

The camera and PC may be exchanging data even when [Copying] disappears from your PC screen. Before disconnecting the USB cable (included), always check that the indicator lamp is off.

Always use FinePixViewer to transfer images with voice memos to a PC.

The cost of an Internet provider for connecting to the internet is the user’s responsibility.

When using FinePixViewer to save images on a data server (network), FinePixViewer may not run as it would in a standalone PC environment.

CAUTION

Always use the FUJIFILM AC Power Adapter AC-5VX (sold separately). If the camera suddenly loses power during data exchange, data exchange will not be performed correctly, and the Memory Card or internal memory could be damaged.

Make sure that the USB cable (included) is connected correctly and securely.

Connect the camera directly to the PC using the USB cable (included). The software may not operate correctly when you use an extension cable, or if you connect the camera via a USB hub.

When your PC has more than one USB port, the camera can be connected to either port.

When Windows 98 SE is used, the supplied software must be installed first before connecting the camera to a PC using the USB cable. The PC will not recognize the camera if it is connected before installation.

A memory Card, the internal memory, data in a Memory Card or data in the internal memory could be damaged if any of the following are performed;

-the USB cable is disconnected-POWER switch or buttons are pressed

132