FujiFilm S8000FD Warning Displays, Remedy, images, the lens, condition, formatted, Explanation, [FOCUS ERROR], [LENS CONTROL, autofocus ring, • Camera fault, V(Blinking red)

Warning Displays

The table below lists the warnings that are displayed on the screen.

	Warning Displayed							Explanation		Remedy
						(Lit red)		The batteries are low or completely out of charge.	Load new or fully charged batteries.
	V(Blinking red)
								There is a strong likelihood of camera shake	Use flash photography. A tripod may be
								because the shutter speed is slow.	recommended, depending on the scene and mode.
							{	The AF (autofocus) cannot work effectively.	•	If the image is too dark, take the picture at a
										distance of around 2 m (6.6 ft.) from the subject.
									•	Use AF lock to take the picture (➝p.34).
	*The shape of the AF								• Select Macro mode when taking close-up shots.
	frame differs depending
	on the setting in the
	[SHOOTING MENU].
				Aperture/				The camera cannot shoot the picture at the correct	The picture can be taken, but the correct brightness
	Shutter speed display							brightness due to too bright or dark shooting	(exposure) will not be obtained.
					(Lit red)			condition.
		[FOCUS ERROR]						• Camera malfunction or fault.	• Turn the camera on again, taking care not to touch
		[LENS CONTROL								the lens.
									• Turn the camera off and on again. If the message
				ERROR]						still appears, contact your FUJIFILM dealer.
		[ZOOM ERROR]						• You are touching the autofocus ring.	•	Do not hold the autofocus ring. The lens will
										automatically refocus when you release the
										autofocus ring.
			[NO CARD]					Memory Card is not inserted when transferring	Insert a Memory Card.
								images.
								• The Memory Card or internal memory is not	• Format the Memory Card or internal memory on
								formatted.		the camera (➝p.117).
								• The Memory Card was formatted on a PC.	• Format the Memory Card on the camera.
			[CARD NOT					• The Memory Card contact area is soiled.	• Wipe the contact area on the Memory Card with a
										soft, dry cloth. It may be necessary to format the
		INITIALIZED]
										Memory Card (➝p.117). If the message still
										appears, replace the Memory Card.
140								• Camera fault.	• Contact your FUJIFILM dealer.