FujiFilm S8000FD Page, Page, Matters, ZOthers, Matters, Problems, Problems, Solutions, Solutions, ZConnecting, Possible causes, Possible causes, Troubleshooting

ZConnecting

Matters	Problems	Possible causes	Solutions	Page
		The camera is not connected to the TV	Connect the camera and TV correctly.	120
		correctly.
		The included A/V cable was connected	After the movie playback mode is stopped,	109,
	There is no image	during movie playback.	connect the camera and TV correctly.	120
	or sound on the
		“TV” is selected as the TV input.	Set the TV input to “VIDEO”.	–
Connecting to TV	TV.
		The video output setting is incorrect.	Change the setting to [NTSC] or [PAL].	111,
				113
		The TV volume is turned down.	Adjust the volume.	–
	The TV image is	The video output setting is incorrect.	Change the setting to [NTSC] or [PAL].	111,
	black and white.			113
	PC does not	The USB cable is not correctly connected	Set up the camera, and connect the USB
Connecting to PC	recognize the	to the PC or camera.	cable correctly.	131
	camera.
Connecting to	Cannot print with	• The USB cable is not correctly	• Set up the camera, and connect the USB
		connected to the printer or camera.	cable correctly.	122
printer	PictBridge.
		• The printer is not turned on.	• Turn the printer on.
ZOthers

Matters	Problems	Possible causes	Solutions	Page
	Nothing happens	Camera malfunction may be caused	Briefly remove the batteries or disconnect	16,
		temporarily.	the AC power adapter. Then reload the
				17,
	when pressing the		batteries or reconnect the AC power
				121,
	buttons on the		adapter and try again.
	camera.
Camera operation		The batteries have run out.	Load new or fully charged batteries.	16, 17
etc.		Camera malfunction may be caused	Briefly remove the batteries or disconnect
	The camera no	temporarily.	the AC power adapter. Then reload the	16,
			batteries or reconnect the AC power
	longer works			17,
			adapter and try again. If you think the
	correctly.			121
			camera is faulty, contact your FUJIFILM
			dealer.

Troubleshooting

149