Problems and Solutions

Problem

Solution

Pictures can not be

• The camera is not properly connected: Connect the camera correctly (P72).

printed.• The printer is off: Turn the printer on.

Only one copy is printed/

The printer is not PictBridge compatible.

the date is not printed.

 

 

• Temporary camera malfunction: Remove and reinsert the battery (P14) or disconnect and

The camera is unre-

reconnect the AC power adapter/DC coupler.
sponsive.

• The battery is exhausted: Charge the battery (P12) or insert a fully-charged spare battery

 

(P14).

The camera does not

Remove and reinsert the battery (P14) or disconnect and reconnect the AC power adapter/DC

function as expected.

coupler. If the problem persists, contact your FUJIFILM dealer.

I want to use an AC power

Check the label on the AC power adapter. The AC power adapter can be used with voltages of

adapter and DC coupler

100 – 240V. Consult your travel agent for information on plug adapters.

overseas.

 

No sound.Turn silent mode off (P94).

The camera does not re-

 

spond to the touch panel,

• The touch panel requires calibration: Calibrate the touch panel (P100).

or does not perform the

• The hand that is holding the camera is touching the panel: Adjust your grip so that the

expected action when

hand that is holding the camera is not touching the panel.

the touch panel is used.

 

110

Troubleshooting