Fujioh FDR-4200D operation manual Re-assembling, Replacing the Light Bulb, 2Rectifier Baffle Panel

2Rectifier Baffle Panel

Wash the Rectifier Baffle Panel in tepid water with a neutral detergent dissolved, then after washed in water, wipe it off thoroughly with a dry cloth.

3Range Hood Body

After wiping the range hood body off with a cloth immersed in a neutral detergent and wring tightly, wipe off moisture thoroughly with a dry cloth.

Re-assembling

Re-assembly will be done by following the opposite ways of disassembly procedures described in Item “Disassembling”.

(1)Make sure that the filters, Rectifier Baffle Panel, oil tray, oil receiving cover, etc. are fixed in the appropriate positions firmly.

(2)Make sure that there is no abnormal vibration sound when running.

Replacing the Light Bulb

Two 60 W light bulbs can be mounted to this range hood.

Prior to replacing the light bulb, purchase a mini-light bulb (in the base diameter 26 mm), rated 120 V - 60 W or below.

1

2

Remove the fixing screw to open the lamp cover.

Replace the burnt out light bulb to a new one.

NOTE: If two bulbs are burnt out, replace them.

3Fasten the fixing screw firmly after closing the cover.

8