2. RANGE HOOD MOUNTING
Referring to “SIZE & DIMENSIONS”,
1 insert 4 washer head wood screws into the bottom plate of the cabinet. Marking before screwing is recommended. Allow about ¼" between the bottom plate and screwheads for hanging the hood body.
With inserting the duct joint into the duct
2 end, hook the temporary fixing holes of the body on the screws, then slide the body backward until the screws are engaged in narrow end of the holes.
After ensuring that the range hood is
3 positioned properly, tighten the 4 screws and fix it firmly using 2 more washer head wood screws.
Fixing Screws
4 | Make the duct joint secure and air tight | Duct Tape, etc. |
using |
| |
tape, etc. (not supplied) |
|
Duct
11
