Fujioh FSR-3000 installation manual Note Keep the screws for reusing later

Models: FSR-3000

1 14

Page 8

Prepare the range hood.

4 (1) Remove the 7" round duct joint on the top plate of the body by removing

2 fixing screws.

(2) Remove the Rectifier Baffle Panel by loosening the screws, and dislocating

its temporary fixing holes from the screws. Note: Use a screwdriver if they are tight.

Rectifier Baffle Panel

(3) Remove the fan case cover by removing

4 screws.

Fan Case Cover

7" Round Duct Joint

Image 8

Contents

MODEL FSR-3000 FSR-3600 FSR-4200 Range Hood INSTALLATION MANUALTABLE OF CONTENTS READ AND SAVE THESE INSTRUCTIONSSAFETY INSTRUCTIONS that must be done means prohibition. It indicates actions, if any, that mustn’t be donemeans forcible execution. It indicates actions, if any SIZE & DIMENSIONS AccessoriesNAME OF PARTS ModelRANGE HOOD LOCATION 3¼ × 10 Vertical Ducting I N S T A L L A T I O N1. PREPARATION 3¼ × 10 Horizontal Ducting 7 Round Vertical Ducting Note Keep the screws for reusing later 3 Run house wiring between service panel and hood locationIn Case of 3-1/4×10 Vertical Discharge In Case of 7 Round Vertical DischargeIn Case of 3-1/4×10 Horizontal Discharge Hit dented points2. RANGE HOOD MOUNTING 3. CONNECTING POWER SUPPLY WIRES Check 4. FINAL ASSEMBLY AND CHECKAssembly refer to “PREPARATION” CIRCUIT DIAGRAM Explanation to the End User120V 60Hz1U030381 2-1-9 Fuchinobe, Sagamihara-shi, Kanagawa-ken 229-0006 JapanTel. +81-42-753-1001 Fax. +81-42-753-1009