Manuals / Fujioh / Kitchen Appliance / Ventilation Hood

Fujioh FSR-3000 installation manual Connecting Power Supply Wires

Models: FSR-3000

1 14

Page 11

3. CONNECTING POWER SUPPLY WIRES

WARNING: • Electrical wiring should be done by a qualified person(s) in accordance with all-applicable codes and standards, including fire-rated construction. An unqualified person doing the work could result in fire, electric shock or injury.

•This range hood uses 120V AC. Do not connect to another voltage since fire, electric shock or damage could result.

Remove the nut from the conduit

1 connector at the end of power wiring.

WARNING: Be sure to switch

power OFF at service panel before wiring.

Connect the conduit through the

2 connecting hole of the body using the nut previously removed.

Power Wiring

Conduit

Nut

Conduit

Nut

Range Hood

Page 11

Image 11

Fujioh FSR-3000 installation manual Connecting Power Supply Wires

Contents

READ AND SAVE THESE INSTRUCTIONS MODEL FSR-3000 FSR-3600 FSR-4200Range Hood INSTALLATION MANUAL TABLE OF CONTENTSSAFETY INSTRUCTIONS that must be done means prohibition. It indicates actions, if any, that mustn’t be donemeans forcible execution. It indicates actions, if any Model SIZE & DIMENSIONSAccessories NAME OF PARTSRANGE HOOD LOCATION 3¼ × 10 Vertical Ducting I N S T A L L A T I O N1. PREPARATION 3¼ × 10 Horizontal Ducting 7 Round Vertical Ducting 3 Run house wiring between service panel and hood location Note Keep the screws for reusing laterHit dented points In Case of 3-1/4×10 Vertical DischargeIn Case of 7 Round Vertical Discharge In Case of 3-1/4×10 Horizontal Discharge2. RANGE HOOD MOUNTING 3. CONNECTING POWER SUPPLY WIRES Check 4. FINAL ASSEMBLY AND CHECKAssembly refer to “PREPARATION” 60Hz CIRCUIT DIAGRAMExplanation to the End User 120V1U030381 2-1-9 Fuchinobe, Sagamihara-shi, Kanagawa-ken 229-0006 JapanTel. +81-42-753-1001 Fax. +81-42-753-1009