Fujitsu A512 Optical drive, Handling data carriers, Inserting, battery, Working with the notebook

Working with the notebook

Inserting	battery
	1
	2

►Position the battery at the edge.

►Insert the battery into the battery compartment until it engages positively (1).

►Slide the release button in the direction of the arrow (2).

►Complete the removal, see chapter "Finishing component removal", Page 56.

Optical drive

This product contains a light emitting diode, classification according to IEC 60825 1:2007: LASER CLASS 1, and must therefore not be opened.

Handling data carriers

Observe the following guidelines when handling data carriers:

•Avoid touching the surface of a data carrier. Only handle data carriers by their edges.

•Always store data carriers in their cases. This will protect the data carrier against being covered in dust, scratched or damaged in any other way.

•Protect your data carriers against dust, mechanical vibrations and direct sunlight.

•Avoid storing a data carrier in areas subject to high temperatures or humidity.

You may use both 8-cm and 12-cm data carriers in the optical drive.

When using a data carrier of lesser quality, vibrations and reading errors may occur.

Fujitsu 31