Fujitsu AP-600RP-USB manual Wizard, How to connect to your Internet Service Provider ISP

Models: AP-600RP-USB

1 63
Download 63 pages 30.26 Kb
Page 25
Image 25

CONNECT2AIR™ WLAN AP-600RP-USB

Page 24 / 62

8.3Wizard

The Wizard section will guide you through the main settings for your AccessPoint. You will be prompted to select your ISP (Internet Service Provider) and to check your security set- tings.

8.3.1 How to connect to your Internet Service Provider (ISP)

It is vitally important that you read this chapter carefully in order to choose the right settings to connect to your ISP (Internet Service Provider). As described in the hardware installation, you must connect your modem to the WAN port (DSL, cable

modem) of your AP.

Select your ISP and click on "Next". You will then be prompted to fill in the appropriate in- formation.

Static IP Address

WAN IP address, subnet mask, standard gateway and your gateway: Enter the settings provided by your ISP.

Page 25
Image 25
Fujitsu AP-600RP-USB manual Wizard, How to connect to your Internet Service Provider ISP, Static IP Address