Button/LED Function
| Name of the button | Function | |
| and LED |
| |
Button | Next | LCD displays the next screen. |
|
|
|
| Previous | LCD displays the Previous screen. |
|
|
|
| ← | Moves the cursor to the left |
|
|
|
| → | Moves the cursor to the right |
|
|
|
| Exit | • When “CHECK” LED lights, pressing this button releases error status (turn |
|
| off “CHECK” and returns to “Scanner Readry” screen). |
|
| • When you are setting on the operator panel, pressing this button returns to |
|
| “Scanner Ready” screen immediately. |
|
|
|
| ENTER | The parameter selected by cursor becomes effective. |
|
|
|
| (START) | When Manual start mode is set or “READ” lamp lights, this button is effective |
|
| and starts the reading. |
|
|
|
| (STOP) | This button is effective during reading operation and stops the reading. |
|
|
|
LED |
| Indicates that the scanner is ON. |
|
|
|
| READ | Indicates that the scanner is reading or ready to read. |
|
|
|
| CHECK | • If it lights, it means that some alarm occurred. Pressing “Exit” button turns |
|
| off “CHECK” lamp. |
|
| • If it blinks at one second cycle, it means that jam or double feed is |
|
| detected. Removing the jammed paper turns off “CHECK” lamp. At double |
|
| feed, pressing “Exit” button turns off “CHECK” lamp. |
|
| • If it blinks at four seconds cycle, it means that ADF cleaning is necessary. |
|
|
|
